AiM LCU-One CAN for MXL QM/EVO3 QM - Manual (Page 14)

LCU-ONE CAN connected to MXL QM and EVO3 QM
User Manual
Release 1.04
1 7
4.3.2 – EVO3 QM
RPM box :
If this info comes from a sensor installed on
the vehicle, press “AIM sensor” button:
‘Multiply factor’ case enables: insert the
proper multiply factor and RPM max value.
If this info comes from the vehicle ECU,
only insert RPM Max value.
Gear sensor box
:
Engaged gear number can be sampled and
shown or not (press “None” button). The
information can come from the ECU, from a
gear potentiometer installed on the vehicle,
or can be calculated through an algorithm
based on RPM and speed. Press the button
corresponding to the vehicle situation and
insert highest gear number if required.
Please note
: calculated gears are available
on EVO3 QM only if a showing gear display
is connected to the logger.
Reference speed box :
The logger can sample speeds coming from
sensors installed on the vehicle and from
the vehicle ECU. Reference speed is used
to calculate gear: it is strongly suggested to
select the speed of a driving wheel.
Note: always refer to MXL QM user manual for any further information concerning
the system configuration not expressly discussed in this tutorial.
www.aim-sportline.com
13