AiM SoloDL - Manual (Page 14)

We have already underlined that Solo
comes with a comprehensive database of
starting line / split line coordinates.
You can easily see the list of coordinates in
the track page; to reach it press
>>> or <<< until the page below on the
left appears and then press “VIEW” button.
You will see the tracks nearest to your posi-
tion.
You can add new coordinates in two diffe-
rent ways:
• Directly through Solo;
• Using Race Studio 2. Software
CHAPTER 7 TRACK MANAGEMENT
Adding Starting Line
Coordinates directly
through Solo
It is very easy to add the coordinates of a
new starting point:
• Go to the Starting Point with Solo in your
hands
• Select Track page using >>> or <<<
buttons
It is very easy to add the coordinates of a
new starting point:
• Go to the Starting Point with Solo in your
hands
• Select Track page using >>> or <<<
buttons
• Press OK and you are ready to go.
In case you have previously selected a Point
to Point track, you will be asked to add the
Finish Point in the same way.
Track
Management function
in Race Studio 2
You have full management of the track
database where you can add or remove
track information.
You can manage the list of the tracks inside
Solo memory by using the Track Manage-
ment feature of Race Studio 2.
Select the desired TRACKS from the list and
click on Send to Solo button.
Solo will receive the track data in a few
seconds.
If the track information is not available in
the list, but lap/splits coordinates are
available, please, follow these instructions:
• Click on New button to create a new
track.
• A panel appears: type in the track name
• The new track will appear in the window
left panel: Select it
• Manually insert the lap coordinates in the
window bottom left panel.
• If split coordinates are available click on
“+” and add as many split as are available
and manually fill in the related
coordinates;
• Click Save
• Click Send to Solo
In a similar way, you can read and modify
Tracks information in the Solo memory.
26 27