Best IP29M Series - Manual (Page 5)

- 5 -
1. SELECT BLOWER OPTION AND INSTALLATION TYPE
E ither an interior or an exterior blower or in-line blower may be used with this hood. The Best by Broan IP29M Series must be installed
with blower models P6, P12, ILB3, ILB6, ILB9, ILB11, EB6, EB9, EB12 or EB15 only. Other blowers cannot be substituted.
(Blowers sold separately.)
Plan where and how the ductwork will be installed.
If installing in-line blower, refer to instructions packed with in-line blower and follow steps 1 up to 9, 11 to 15, 17 and up of this
manual.
Install proper-sized ductwork, elbows and roof or wall cap for the type of blower you are installing. Use metal duct tape to seal duct joints.
7” (178) ROUND DUCT
ROOF CAP
30” TO 36” (762 to 914)
ABOVE COOKING SURFACE
HOOD
DECORATIVE
FLUE
12”, 18”, 24” or 30”
(762, 305, 457 or 610)
or TRIM
HH0080A NOTE: Dimensions in ( ) are in mm.
MODEL P6 SINGLE INTERIOR BLOWER
TYPICAL DUCTWORK
10” (254) ROUND DUCT
ROOF CAP
30” TO 36” (762 to 914)
ABOVE COOKING SURFACE
HOOD
DECORATIVE
FLUE
12”, 18”, 24” or 30”
(762, 305, 457 or 610)
or TRIM
HH0081A NOTE: Dimensions in ( ) are in mm
ROUND
TRANSITION
4½” x 18½”
to 10”
(114 x 470
to 254)
(see page 3)
MODEL P12 DUAL INTERIOR BLOWER
TYPICAL DUCTWORK
10” (254)
ROUND DUCT
EXTERIOR
BLOWER
30” TO 36” (762 to 914)
ABOVE COOKING SURFACE
HOOD
DECORATIVE
FLUE
12”, 18”, 24” or 30”
(762, 305, 457 or 610)
or TRIM
HH0082A NOTE: Dimensions in ( ) are in mm
MODEL EB6, EB9, EB12 OR EB15
EXTERIOR BLOWER TYPICAL DUCTWORK
IN-LINE BLOWER
HH0083A
30” TO 36” [762 to 914]
ABOVE COOKING SURFACE
ROOF CAP
WALL
CAP
HOOD
NOTE: Dimensions in ( ) are in mm.
DECORATIVE
FLUE
12”, 18”, 24” or 30”
(762, 305, 457 or 610)
or TRIM
10” [254] ROUND DUCT
(except ILB3, 8’’ [203] ROUND DUCT)
MODEL ILB3, ILB6, ILB9 OR ILB11
IN-LINE BLOWER TYPICAL DUCTWORK