Operation, Cont’d) – Best IP29M Series User Manual
Page 14
- 14 -
Grease filter reset
• Once the grease filter cleaning is done, press on the grease filter reset push-button (item 4 on control illustration) to reset the filter
maintenance timer. This will also shut off the grease filter maintenance icon (item 5 on control illustration).
Grease filter maintenance indicator
• After 30 hours of operation, the grease filter maintenance icon (item 5 on control illustration) appears. This means filters need to
be cleaned.
• Once the grease filter cleaning is done, press on grease filter reset push-button to reset the filter maintenance timer.
Interface backlighting
• Off mode (Blower off, Particulates sensor and Air refresh modes disabled): Backlighting is off.
• Halogen lighting activated: does not affect backlighting.
• Blower turns on: Backlighting at maximum intensity.
• Particulates sensor and Air refresh mode activated: Backlighting at maximum intensity.
• Particulates sensor at sensitivity settings and Air refresh in selection mode: Backlighting at minimum intensity.
HEAT SENTRY
This hood is equipped with a HEAT SENTRY thermostat. This thermostat is a device that will start or speed up the blower if it senses
excessive heat above the cooking surface.
•
If blower is OFF—it turns the blower to speed 3 (blower speed icon shows H).
•
If blower is ON—it turns the blower up to speed 3 (blower speed icon shows H).
NOTE:
When Heat Sentry is activated, Air refresh mode and Particulate sensor are inactivated. Also, communication
coming from the INSTEON™ Module is disabled.
•
When the temperature level drops to normal, the blower will return to its original setting (blower speed icon will show the original
blower speed).
•
To turn off the blower when Heat Sentry is activated, press and hold the blower push-button (item 2 on illustration) for more
than 1 second.
INSTEON™ Network compatibility
Your IP29M Series range hood can be linked to INSTEON network, if installed in your house. For more details, refer to INSTEON
devices instruction sheet.
21.OPERATION
(CONT’D)