8 switching the resolution, 9 interbus, Industrial pcs bpc1000 – ADS-TEC BPC1000 User Manual
Page 20
Industrial PCs BPC1000
20
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
5.8 S
WITCHING THE RESOLUTION
The feature of switching the resolution allows manually changing the display resolution at
the device. Stages 0-2 are the predefined default settings you can find in the table. Stages
3-7 are undefined defaults. A resolution of 800 x 600 is used for output by default.
NUMBER
RESOLUTION
0
800 x 600
1
1024 x 768
2
1280 x 1024
3
[DEFAULT] 800 x 600
4
[DEFAULT] 800 x 600
5
[DEFAULT] 800 x 600
6
[DEFAULT] 800 x 600
7
[DEFAULT] 800 x 600
5.9 I
NTERBUS
This interface is integrated inside the device depending on the version.
If Windows CE.net or Windows XPe is used, the entire operating system may be completely installed from the USB stick using
the respective image. The required image can be purchased from the ads-tec company or via the ASSIX online portal.
PIN NUMBER
SIGNAL NAME
1
DOH
2
DIH
3
GNDi
4
GND
5
Vcci
6
DOL
7
DIL
8
Vcc
9
Not connected