Settings – activation – ADS-TEC Net Cap User Manual
Page 65
![background image](/manuals/553727/65/background.png)
NetC@p 3.0 65
www.ads-tec.com
Host Interfaces
When using PC-systems with multiple network adapters, select the desired IP-Address room the
slave should operate with.
TCP/IP Ports
NetC@p uses three TCP/IP ports, whose numbers can be entered in the three text fields. To
establish a connection between master and slave, the three number-fields of master and slave
must be identical. The basic settings for the used ports are:
Port 1 :
3997
Port 2 :
3998
Port 3 :
3999
Firewall
The ports can be redefined in any way, e.g. when using a firewall, and must be enabled for TCP-
and UDP- communication.
Settings – Activation
The register panel “Activation“ allows modifications concerning the control permission.