Settings - connection – ADS-TEC Net Cap User Manual
Page 34
NetC@p 3.0 34
www.ads-tec.com
Settings - Connection
TCP/IP Ports
NetC@p uses three TCP/IP ports, whose numbers can be entered in the three text fields. To
establish a connection between master and slave, the three number-fields of master and slave
must be identical.
The basic settings for the used ports are:
Port 1 :
3997
Port 2 :
3998
Port 3 :
3999
Firewall
The ports can be redefined in any way, e.g. when using a firewall, and must be enabled for TCP-
and UDP- communication.
Intranet (closed networks)
If a master should not be available for a group of slaves, additionally to the assignment of one
password a secondary port number group can be added. Then the master appears no longer
automatically in the synoptical list of non-permitted slaves.
For this configuration all permitted slaves must also have registered the modified port numbers.