ADS-TEC OPC7013/7015/7022 - Manual (Page 40)

Industrial PCs OPC7013/7015/7022
40
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
11.3 2. F AN REPLACEMENT
Warning:
The fan supply cable must be pulled off before replacing the fan!
R EMOVAL
Remove the screws holding the fan by using a Tx 10 size screw driver.
The fan can now be lifted from the body and be replaced with a new fan.
I NSTALLATION
Reinstall all previously removed screws and plug the fan supply cable in.