Echo 71825 - Manual (Page 5)

3
5. Do not allow hands or other part of the body or clothing inside the feeding
chambers, discharge chute, or near any moving part.
6. Keep all guards and deflectors in place and in good working condition.
7. Always stand clear of the discharge area when operating this machine.
8. Keep your face and body back from the feed opening.
9. Do not over reach. Keep proper balance and footing at all times.
10. Do not transport or move machine while the machine is running.
11. If the machine becomes clogged, shut off engine. Allow machine to come to a
complete stop before clearing debris.
1. Before towing, rotate the chipper chute opening to face in the opposite
direction of the vehicle that is towing it. This will prevent the chipper chute
from projecting over the trailer wheels and striking foreign objects.
2. Lock the rotor by inserting a bolt or punch through the locking holes on the side
of the rotor housing.
3. Use a 2 inch trailer ball, and always connect safety chains. Make sure trailer
hitch bolts are tight and secure.
4. Maximum towing speed should not exceed 55 MPH. Tire pressure should be 60
psi; check wheel lug bolts periodically to be sure they are tight and secure.
5. Make sure that the jack stand on trailer is in the UP position to clear the
ground during towing. Place the jack stand on a level surface and secure it in
the DOWN position before use.
6. Shut off fuel supply to engine when towing.
1. When this equipment is stopped for servicing, inspection, storage, or to change
an accessory, disconnect the spark plug wire from the spark plug. Disconnect
battery.
2. Store the machine out of the reach of children and where gasoline vapors will
not reach an open flame or spark. For storage periods of three months or more,
drain the gasoline and dispose of it in a safe manner. Always allow the machine
to cool before storing.
Safety Instructions
Cont.
Additional Safety
Rules for Towable
Models
Maintenance and
Storage for Towable
Models