Chipper and hydraulic feed limited warranty – Echo 71825 User Manual
Page 23

Chipper and Hydraulic Feed Limited Warranty
Crary Bear Cat Chipper models 71620, 71825, 72620, and 72825 are warranted for one year from
date of sale.
Within the above stated period, Crary Co. will replace any part(s) found to be defective in material
and/or workmanship, after the receipt of the part in our plant. Labor costs to replace these defective
parts will be paid at a Crary established labor rate and time allowed (flat rate) for repair. All
transportation charges incurred in shipping part(s) are the responsibility of the purchaser.
This warranty is void in the case of accidents, failure to perform normal maintenance, or failure to
follow those instructions listed in the service manual. This warranty is also in lieu of all other
expressed warranties and voids any implied warranty as to the merchantability or fitness of the
product for a particular purpose and of any other obligation on the part of Crary Co. Some states do
not allow limitations on how long the implied warranty lasts, so the above limitation may not apply to
you.
This warranty applies only to parts or components which are defective, and does not cover
necessary repair due to normal wear, misuse, accidents, or lack of proper maintenance. This
includes belts, pulleys, and chipper blades. Regular routine maintenance of the unit to keep it in
proper operating condition is the responsibility of the owner.
All warranty repair reimbursable under the Crary Co. warranty must be performed by an authorized
Bear Cat service dealer using Bear Cat approved replacement parts. Repair or attempted repair by
anyone other than an authorized Bear Cat service dealer is not reimbursable under the Crary Co.
warranty. In addition, these unauthorized repair attempts may result in additional malfunction, the
correction of which is not covered by warranty.
Crary Co. is not liable for indirect, incidental, or consequential damages in connection with the use of
this product including any cost or expense or providing substitute equipment or service during
periods of malfunction or non-use.
Some states do not allow the exclusion of incidental or consequential damages, so the above
exclusion may not apply to you. This warranty gives you specific legal rights. You may also have
other rights which vary from state to state.
Be sure to note the Chipper serial number in any correspondence with Crary Co. or any authorized
Bear Cat dealer. The serial number is located on the rotor assembly cover.