beautypg.com

5 service & maintenance, Warning – Echo 74624S Owners Manual v.1 User Manual

Page 24

background image

Page 18

6” Chipper Operator’s Manual

Section

5 Service & Maintenance

5.1 MAINTENANCE SCHEDULE

Check the following items listed in the service and mainte-
nance schedule and if necessary, take corrective action.
This schedule is designed for units operating under normal
conditions. If the unit operates in adverse or severe usage
conditions check and service items more frequently.

See engine owners manual for further maintenance and
troubleshooting information.

COMPONENT

MAINTENANCE

REQUIRED

Refer to Engine

Operator manual

EVERY 8

HOURS

EVERY

25

HOURS

EVERY

50

HOURS

EVERY

200

HOURS

EVERY

YEAR

AIR CLEANER

CHECK AND CLEAN (1)

AIR INTAKE

CLEAN (1)

ENGINE OIL

CHANGE (1)

FUEL FILTER

REPLACE

SPARK PLUG

CHECK CONDITION AND
GAP

ENGINE OIL

CHECK

FUEL TANK

FILL

CHIPPER ANVIL

CHECK 1/16" TO 1/8"
CLEARANCE AND RE-
TORQUE TO 75 FT. LBS. (2)

CHIPPER BLADES

CHECK SHARPNESS AND
RETORQUE TO 75 FT. LBS.
(2)

ALL INTERNAL AND
EXTERNAL NUTS AND
BOLTS

RE-TORQUE PER
ASSEMBLY TORQUE CHART

BELT CONDITION

CHECK

BELT TENSION

CHECK

GREASE ZERKS

LUBE

ENTIRE MACHINE

CLEAN

HYD. OIL FILTER

REPLACE

WHEEL BEARINGS

CHECK AND REPACK

FREQUENCY

SERVICE AND MAINTENANCE SCHEDULE

(1) PERFORM MORE FREQUENTLY UNDER EXTREMELY DUSTY CONDITIONS.

As the Chipper Limited Warranty states, failure by the Owner to perform normal maintenance will void the machine's
warranty. The aggressive, high-speed nature of chipping REQUIRES THE OWNER TO PERFORM THE ABOVE LISTED
NORMAL MAINTENANCE. Special consideration to maintain and re-torque the CHIPPER ANVIL, CHIPPER BLADES, AND ALL
INTERNAL AND EXTERNAL NUTS AND BOLTS is the sole responsibility of the Owner. Failure by the Owner to do so shall be
cause for Crary BearCat to deny warranty.

(2) PERFORM MORE FREQUENTLY WHEN CHIPPING DRY OR DIRTY WOOD.

To prevent personal injury or property damage: Shut
off engine, disconnect spark plug wire and make sure
that all moving parts have come to a complete stop
before, servicing, adjusting or repairing.

WARNING

This manual is related to the following products: