Echo 76624 Owners Manual v.1 - Manual (Page 20)

18 6 INCH CHIPPER
Section
5.1 mainTenance schedule
service & mainTenance
your chipper must be regularily serviced and maintained. this schedule is designed for units operating under normal
conditions. If the unit is operating in adverse or severe usage conditions it may be necessary for the items to be checked
and serviced more frequently.
see engine oWners manual for furTher engine mainTenance and TroubleshooTing informaTion.
To prevent personal injury or property damage: shut off engine, disconnect spark plug wire and make sure that
all moving parts have come to a complete stop before, servicing, adjusting or repairing.
Warning
service and mainTenance schedule
freQuencY
comPonenT
mainTenance
reQuired
refer To engine
oPeraTor manual
everY 8
hours
everY
25
hours
everY
50
hours
everY
200
hours
everY
Year
aIR CleaNeR CheCk aNd CleaN (1)
aIR INtake CleaN (1)
eNGINe oIl ChaNGe (1)
Fuel FIlteR RePlaCe
SPaRk PluG CheCk CoNdItIoN aNd GaP
eNGINe oIl CheCk
Fuel taNk FIll
ChIPPeR aNvIl
CheCk 1/16" to 1/8"
CleaRaNCe aNd Re-toRQue
to 75 Ft-lbS. (2)
ChIPPeR bladeS CheCk ShaRPNeSS aNd Re-
toRQue to 120 Ft-lbS. (2)
all INteRNal
aNd exteRNal
NutS aNd boltS
Re-toRQue PeR aSSeMbly
toRQue ChaRt
belt CoNdItIoN CheCk
belt teNSIoN CheCk
GReaSe zeRkS lube
eNtIRe MaChINe CleaN
hyd. oIl FIlteR
RePlaCe
Wheel
beaRINGS
CheCk aNd RePaCk
(1) PeRFoRM MoRe FReQueNtly uNdeR extReMely duSty CoNdItIoNS.
(2) PeRFoRM MoRe FReQueNtly WheN ChIPPING dRy oR dIRty Wood.
as the chipper limited Warranty states, failure by the owner to perform normal maintenance will void the machine's
warranty. The aggressive, high-speed nature of chipping reQuires The oWner To Perform The above lisTed
normal mainTenance. special consideration to maintain and re-torque the chiPPer anvil, chiPPer blades, and
all inTernal and eXTernal nuTs and bolTs is the sole responsibility of the owner. failure by the owner to do
so shall be cause for bear cat to deny warranty.
5