Echo CH500H Owners Manual v.2 - Manual (Page 8)

5" and 8" Skid Steer Chipper
4
SAFETY
1.7 saFeTY DeCal loCaTIons
the numbers below correspond to the decals in Section 1.6. Familiarize yourself with all of the safety and operational
decals on the machine and the associated hazards. See the engine owner’s manual or contact the engine manufacturer
for engine safety instructions and decals. Make certain that all safety and operating decals on this machine are kept
clean and in good condition. decals that need replacement must be applied to their original locations.
Pn 18983-00
Feed rOller
SuPPOrt MuSt
Be SeCured
iN tHe uP PO-
SitiON PriOr
tO ServiCiNg
CHiPPer Feed
area. tHe Feed
rOller CaN Fall aNd CauSe Severe BOdily HarM. CON-
Sult OWNerS MaNual FOr PrOPer MetHOd OF SeCur-
iNg Feed rOller SuPPOrt. lOWer Feed rOller BeFOre
OPeratiNg CHiPPer.
9
10 Pn 32109-00
dO NOt OPerate tHiS
eQuiPMeNt iN tHe viCiNity
OF ByStaNderS. dO
NOt allOW CHildreN tO
OPerate tHiS eQuiPMeNt.
alWayS StaNd Clear OF
diSCHarge area WHeN
OPeratiNg tHiS MaCHiNe.
keeP FaCe aNd BOdy aWay
FrOM diSCHarge areaS.
rOtate tHe diSCHarge tuBe Over tHe HitCH
BeFOre tOWiNg aNd lOCk SeCurely iN PlaCe.
4
5
9
1
2 3
6
7
10
8