Echo CH500H Owners Manual v.2 - Manual (Page 21)

5" and 8" Skid Steer Chipper
17
Section
sPeCIFICaTIons
7
sPeCIFICaTIons
rOtOr SPeed 2000 rPM at 15 gPM 1500 rPM at 25 gPM
FraMe Material
1/4" tHiCk Steel CONStruC-
tiON
1/4" tHiCk Steel CONStruC-
tiON
CHute SiZe 32" x 36" 32" x 36"
drive SySteM HydrauliCS HydrauliCS
Skid-Steer HydrauliCS StaNdard Or HigH-FlOW HigH-FlOW
CHiPPer BladeS 4 BladeS (tOOl Steel) 4 BladeS (tOOl Steel)
rOtOr SiZe 20" x 1-1/4", 140 POuNdS 30" x 1-1/4", 275 POuNdS
WeigHt 1145 lBS. 1525 lBS.
CHiPPer OPeNiNg SiZe* 5-1/2" x 7" 9" x 9"
CONtiNuOuS CHiPPiNg SiZe* 3" (76.2 MM) diaMeter 5" (127 MM) diaMeter
diSCHarge tuBe rOtatiNg aNgle
raNge
360 degreeS 360 degreeS
*CONtiNuOuS CHiPPiNg SiZe ratiNg reFerS tO tHe SuggeSted FeediNg SiZe OF liMBS FOr NOr-
Mal OPeratiONS. liMBS uP tO tHe CHiPPer OPeNiNg SiZe May Be Fed, But deCreaSed PerFOr-
MaNCe Will OCCur.
sPeCIal Torque requIremenTs
loCaTIon on maCHIne HarDware DesCrIPTIon
Torque
(unIFIeD InCH)
Torque
(meTrIC)
CH500H CHiPPer Blade
MOuNtiNg BOltS
5/16" x 1-1/4" Hex Hd grade 8
BOltS (Qty 8)
25 Ft-lBS. 34 N.m
CH800H CHiPPer Blade
MOuNtiNg BOltS
1/2" x 2-1/2" Flat Hd Skt. (Qty 12) 120 Ft-lBS. 163 N.m
7.1 sPeCIal Torque requIremenTs