Echo CH611DH Instruction v.9 - Manual (Page 5)

Instruction Sheet
5
8. Dialog Box 16: Highlight "CG150" and click the "OK"
button.
9. Dialog Box 17: Selet channel shown and click the "Set"
button.
10. The main screen detailed below indicates that the drivers are installed.
11. Once the drivers are installed, you will need to download the diagnostic data files from the "Plus One Service Tool."
12. It is now necessary to connect the Communications Cable provided in kit from the computer to the controller port.
SEE PAGE 8 FOR DETAILS. Next, supply a good source of 12 volt power to the controller. You'll know if it's properly
powered if the controller's indicator light turns on or begins to flash.
13. The Communication Cable MUST BE CONNECTED in order to move forward.