Echo CH611DH Instruction v.9 - Manual (Page 13)

Instruction Sheet
13
The box labeled Feed_FWD is when the forward solenoid on the 18527-00 DO3 valve assembly
has been powered or activated
The box labeled
FWD_FAULT is when the controller has detected a problem with the forward coil
or the wiring up to this coil.
CLICK FIVE -
SUDDEN_REVERSE is when the RPM has dropped suddenly at the disc.
GRADUAL_REVERSE is when the disc has dropped gradually
HIGH_PSI_REV is when the hydraulic system sees high pressure due to a jam at the feed roller
this will activate the REVERSE_FEED box below for 1 second.
FEED_REV is when the feed roller is traveling in the reverse direction after the PSI _Switch has
been activated.
The box labeled
REV_FAULT is when the controller has detected a problem with the reverse coil
or the wiring up to this coil.
CLICK SIX -
Safety_Bar_Sw is when the safety bar has been activated or tripped.
(For CE Compliant machines) Safety_BAR_OVERIDE is when the CE safety bar override
switch has been pushed to deactivate the safety bar switch.
CLICK SEVEN -
Chipperspeed_HZ will tell you what the disc is traveling in hertz
Chipper_RPM will tell you what the disc is traveling in RPM.
CLICK EIGHT -
CP_Green_Flash -will tell you when the tri-color LED is flashing Green
CP_Green_ON will tell you when the Green is solid at the tri-color light