B&K AVR202 Plus - Manual (Page 65)

13259 0303 62
From Remote From Front Panel Action
1 À(PAUSE) or §(STOP) . (UP) or - (DOWN) move to Zone 1 Setup (A)
2 SEL or ENTER ↵ (ENTER) activate ADVANCED ZONE A SETTINGS
Set the maximum level of Zone 1 (A) - Max level allows you to set a maximum volume level for Zone 1 (A). This
is very useful if you are using speakers that can’t handle the maximum power output from your receiver or if you
simply wish to limit the volume that can be achieved using normal front panel or remote operation.
WARNING - If you set this level too low, the receiver may appear broken (no sound).
From Remote From Front Panel Action
1 À(PAUSE) or §(STOP) . (UP) or - (DOWN) move to Max Level
2 ¶ (REW) or • (FF) VOLUME KNOB adjust level to desired value
Set Zone 1 (A) product ID - Each message transmitted from your remote includes a Product Code, identifying
the manufacturer, and Zone product ID code from 1 to 16. The product ID code allows multiple B&K products to
be controlled from the same remote. Your receiver actually uses two product ID codes - one for Zone 1 (A)
(normally set to ID code 1) and the other for Zone 2 (B) (normally set to ID code 2). If you have a system with
multiple B&K products then you may wish to set the Zone product ID codes to other values. Note that you cannot
set the Zone 1 (A) product ID to the same setting as Zone 2 (B) or vice versa. If you need to set Zone 1 (A) to the
current Zone 2 (B) setting then set Zone 2 (B) to some other value first.
WARNING - if you change the Zone product ID code in the receiver without making the corresponding
change to the remote then the remote will no longer work. Refer to the separate remote manual for details
on changing the remote’s product ID (“device code”).
ADVANCED ZONE A SETTINGS
1 Max Level +15 dB
2 Zone ID 1
3 On Sreen Display Enabled
4 V1 Output Tape
5 Surround Modes Auto
next item adjust
MENU advanced setup
1 Max Level +15 dB
ZA max level +15
ADVANCED ZONE A SETTINGS
1 Max Level +15 dB
2 Zone ID 1
3 On Sreen Display Enabled
4 V1 Output Tape
5 Surround Modes Auto
next item adjust
MENU advanced setup
2 Zone ID 1
ZA ZONE ID 1