B&K AVR202 Plus - Manual (Page 20)

13259 0303 17
SURROUND OUTPUTS
Your receiver has multiple surround processor outputs for use with external amplifier(s) or powered speakers. The
AVR 202+ receiver allows further processing of the surround channels for the precise decoding of Dolby Digital
Surround EX and DTS-ES soundtracks via matrix decoding.
Here is a typical surround output setup:
Subwoofer Output - Connect an RCA cable from the receiver’s SW output (part of the surround outputs). If your
subwoofer does not contain its own amplifier you will need to purchase an external B&K or other power amplifier.
Connect the receiver’s SW output to the audio input of the external amplifier. Connect the external amplifier’s
speaker output to your subwoofer.
Connect to the Subwoofer 'SW '
power am plifier input
Connect to the Surround Left
'Sl' power am plifier input
Connect to the Surround Right
'Sr' power am plifier input
SURRO UND O UTPUTS
CENTER
Connect to the Center power
am plifier input
Connect to the Left Front
power am plifier input
Connect to the Right Front
power am plifier input
Connect to the Surround Back Left
'Sbl' power am plifier input
Connect to the Surround Back Right
'Sbr' power am plifier input
L BACK L SURR FRO NT L
SUB R BACK R SURR FRO NT R