Adjusting the volume, Temporary level adjustments – B&K AVR202 Plus User Manual
Page 51
![background image](/manuals/55320/51/background.png)
13259 0303
48
ADJUSTING THE VOLUME
From Remote
From Front Panel
Action
VOLUME
∧ or VOLUME ∨
VOLUME KNOB
adjust volume
MUTE
can’t do from front panel
instant volume all the way down
press MUTE again to restore
Note: The front panel VOLUME KNOB is used to control multiple functions and, therefore, cannot always control
the volume. The VOLUME KNOB may control volume in the menu system when not used for parameter
adjustments. During normal operation the VOLUME KNOB may switch to controlling other functions but will return
to MASTER LEVEL after a few seconds. The remote’s VOLUME
∧ or VOLUME ∨ will always change master
volume level except in the SETUP SPEAKER LEVELS and SETUP ‘Source’ INPUT menus.
TEMPORARY LEVEL ADJUSTMENTS
Occasionally you may find that a you can’t hear the dialog very well in a particular movie, or a movie has too
much bass, etc. You can temporarily adjust the center, surround, and subwoofer settings without changing the
permanent settings you made in the under SETUP SPEAKER LEVELS menu.
From Remote
From Front Panel
Action
CENTER
À
or CENTER
§
see Zone 1 (A) operation
adjust center volume
REAR
À
or REAR
§
see Zone 1 (A) operation
adjust surround volume
SUB
À
or SUB
§
see Zone 1 (A) operation
adjust subwoofer volume
Note: these settings are temporary and will be lost when you put your receiver to sleep or turn off the main power.
If you have particular temporary setting that you use often, you may save them in a preset.
Z1 VOLUME 0.0
Z1 Master Volume 0.0 dB
Z1 CENTER 0.0
Z1 Center Volume 0.0 dB