B&K AVR202 Plus - Manual (Page 49)

13259 0303 46
OPERATION
The following outlines the normal day-to-day operation of your processor from the supplied universal remote or
directly from your processor’s front panel. The universal remote is also capable of controlling other equipment and
storing sequences of commonly used commands. All operations described below refer to the B&K Components
Ltd. AV 7.1 System Remote Controller. Refer to the separate remote manual for details on these functions.
POWER ON/OFF
The main power switch on the front panel of your receiver must be on for the receiver to operate. When this
switch is off all power is removed from your receiver. This prevents turning it back on with the remote control. You
can use the main power switch for normal day to day operation but we suggest you use the sleep function instead
so that the receiver can be turned on and off from the remote. After turning on the main power you must wait a
few seconds while your receiver restores its internal memory. You may want to turn off the main power switch
when your receiver will be idle for extended periods of time or during periods of power line fluctuations. Your
receiver will not lose its memory while the main power switch is off.
From Remote From Front Panel Action
can’t turn off main power from remote POWER ON/OFF main power on/off
SLEEP
Normally you will simply put your receiver to sleep (standby) when not in use. Sleep mode keeps a bare minimum
of functions running in order to allow remote control operation and fast start up. Note that the front panel SLEEP
button is lit while your receiver is asleep and is off when your receiver is operating. Also note that the remote
POWER button is a ‘power toggle’ and will put your receiver in and out of sleep. OFF will always put the receiver
into sleep. B&K or AUDIO will always wake up your receiver and set the remote to control the receiver
From Remote From Front Panel Action
1 B&K or POWER e SLEEP wake up receiver (POWER is a toggle)
2 OFF or POWER e SLEEP put receiver to sleep (standby)
PLEASE WAIT
BK
Powering Up -- Please Wait
BK
BK Com ponents
B K C O M P O N E N T S
AVR 202+ Receiver
Version 2.07
BK Com ponents
* Digital DNA