IOGear GCS1104-KM1 Manual - Manual (Page 30)

30
For the DVI computers:
Simply follow the instruction of the Installation Section.
For the VGA computers:
Connect each of your VGA video output with a VGA Male to Male cable. 1.
Connect the other side of the VGA cable to the VGA connection on the DVI-A Male to VGA Female 2.
Adapter.
Connect the DVI-A connection to the CPU DVI port of the KVM.
3.
Then use the provided DVI-D KVM cable for USB, audio and mic. connection ONLY. 4.
For the Console DVI Port
Connect the DVI-I cable from the Console DVI port to the monitor.