IOGear GCS1104-KM1 Manual - Manual (Page 17)

17
Autoscan Mode
You can either activate Autoscan Mode via front panel push button or hotkeys.
Function Description
Auto Scan Front Panel Push Button Press and hold port 1 and port 2 Pushbutton simultaneously
for 2 seconds to activate Autoscan Mode*
Hotkeys [Scroll Lock] [Scroll Lock] [a]
[Enter]
Activate Autoscan mode. It
will cycle from port to port
every 5 seconds (default)
[Scroll Lock] [Scroll Lock] [a]
[n] [Enter]
Activate Autoscan mode. It
will cycle from port to port
every n seconds**
*Note: Autoscan Mode from front panel push button will be scanning a port every 5 seconds by default. If
you wish to have the Autoscan Mode be scanning with different time interval, please trigger Autoscan Mode
via hotkeys.
**Note: n is an interval between 1 and 99 that stands for the time (in second) desire for scanning each port.