IOGear GCS1104-KM1 Manual - Manual (Page 23)

23
Step 1
Please follow through the installation process from
the Installation section.
Step 2
Switch ALL focus to the port that you will be using
to perform the firmware upgrade. (Please refer to
Port Switching Section). Then, go to www.iogear.
com to download the latest available firmware or
the specific firmware that you wish to use.
Firmware Upgrade
Step 3
Shut down all the other computers that are
connected to the KVM. Then Invoke Firmware
Upgrade Mode. (Please refer to Hotkeys Setting
Mode section)
Step 4
Disconnect your keyboard and mouse from the
console keyboard and mouse port, then connect
them to the USB peripheral sharing ports.