I.R.I.S. IRIScan Anywhere 3 Quick Start - Manual (Page 12)

En
gli
sh
Light indicators
Refer to the table below to view the lighting patterns of the Power and Status indicators.
: Blinking slowly
: Blinking rapidly
: Steadily on
: Off
Power Status Description
color(*)
• When the scanner is connected to a computer: the battery is fully charged
and the scanner is ready for use.
or
• When the scanner is not connected to a computer: the scanner power is on
and the scanner is ready for use.
green color(*)
Scanning current original.
orange color
The battery is being charged when scanner power is on.
orange color(*)
Reading/writing data in the scanner memory or storage devices.
orange
The battery is being charged when the scanner power is off.
orange color(*)
The battery power is low.
•
The scanner is powered off.
•
The battery is fully charged (when scanner power is off and connected to a
computer).
green color(*)
• Initializing system and memory devices.
•
Busy scanning and storing image file.
green color(*)
•
Paper jam. Press the Power button.
•
Calibration error. Please refer to the complete User Guide.
color(*)
No memory card, card full (free space below 10MB), card error, card locked
or the file system is not supported. Remove files from the card to clear space,
unlock the card if it is locked, or try another card.
orange color(*)
The battery power is extremely low, and the scanner will power off
automatically in 5 seconds. Charge the battery immediately.
(*) The following colors indicate the current resolution:
Green = 300 dpi (default setting)
Orange = 600 dpi
5. FAQ and Technical Support
Should you experience issues when using your Readiris TM , Cardiris TM or the IRIScan TM scanners
consult the Frequently Asked Questions on our website www.irislink.com/support/faq or
contact Technical Support at www.irislink.com/support.
Power Status