JLG 110HX Service Manual - Manual (Page 17)

SECTION 1 - SPECIFICATIONS
3120864 – JLG Lift – 1-5
1.6 PRESSURE SETTINGS
Proportional Valve.
Drive - 241 bar.
Lift Up - 207 bar.
Lift Down - 83 bar.
Telescope In - 172 bar.
Telescope Out - 103 bar.
Swing - 83 bar.
Accessory Valve.
Main Relief - 241 bar.
Sequence Cartridge - 31 bar.
Pressure Reducing Cartridge - 38 bar.
Solenoid Valve.
Main Relief - 172 bar.
Rotate - 172 bar.
Level - 172.4 bar.
Steer - 138 bar.
Extend-A-Reach Valve.
Extend (Up) - 172 bar.
Retract (Down) - 48 bar.
NOTE: Refer to Section 2 for pressure setting procedures.
1.7 CYLINDER SPECIFICATIONS
NOTE: All cylinder dimensions are given in inches (in), with
the metric equivalent, centimeters (cm) in parenthe-
ses.
Table 1-8.Cylinder Specifications
Cylinder Bore Stroke Rod Dia.
Lift 9.0
(22.9)
43.375
(120.3)
4.0
(10.2)
Maser Level
(100HX, 110HX) 2.5
(6.4)
14.5
(36.8)
1.25
(3.2)
Master Level
(100HX+10) 2.5
(6.4)
15.1
(38.4)
1.25
(3.2)
Slave Level
(100HX, 110HX) 2.5
(6.4)
13.875
(35.2)
1.25
(3.2)
Slave Level
(100HX+10) 3.5
(8.9)
6.94
(17.6)
1.75
(4.4)
Steer 3
(7.6)
10.31
(26.2)
1.5
(3.8)
Telescope
(100HX, 100HX+10 5
(12.7)
247.81
(629.4)
3.5
(8.9)
Telescope
(110HX) 5
(12.7)
266
(675.6)
3.5
(8.9)
Axle Extension 2.5
(6.4)
28.19
(71.6)
1.25
(3.2)
Extend-a-Reach
(100HX+10) 3.5
(8.9
18.31
(46.5)
2.5
(6.4)