Brother DCP-1400 - Manual (Page 37)

M A K I N G C O P I E S 5 - 1
5
5
Making Copies
Basic Copy Operations
You can use your DCP as a copier, making up to 99 copies at a time. The DCP
can stack the copies or collate (sort) them.
The scannable area of your DCP
begins at approximately one-sixth
inch (4mm) from the edge of the
paper.
Making a Single Copy (Using the ADF)
1
Place the original face up in the ADF.
2
Press Copy.
Do NOT pull on the paper while copying
is in progress.
Making Multiple Copies (Using the ADF)
1
Insert the original face up in the ADF.
2
Use the numeric keys to enter the number of copies you want (up to 99).
3
Press Copy.
To stop copying and eject the original, press Stop.
To release the original document, press Stop.
To sort the copies, use the Sort key.
Copy
Keys
Not
Scannable
area
1/6" (4mm)
1/6" (4mm)
COPYING P.01
100%