JLG 67SL Operator Manual User Manual

Page 36

SECTION 3 - MACHINE CONTROLS

3-4

– JLG Lift –

3121321

1. Start Assist - This push button is used to help assist

starting the machine in cold temperatures. (overrides 6
second crank limit of Engine Start Button)

2. Engine Start - A push button switch that, when

depressed, will start the engine. (crank time limited to 6
seconds before power supply required recycling)

3. Hourmeter - A meter used to measure the amount of

time the machine is in use.

4. Glow Plug LED - This Yellow LED is off under normal

operating conditions. The LED is illuminated when the
ignition is on and the temperature sensing requires pre-
glow.

NOTE:

Do not start machine when Glow Plug LED is illuminated.
Once the LED goes out, machine starting is permitted.