JLG E300 Operator Manual - Manual (Page 74)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6-4 – JLG Lift – 3121252
Hydraulic Oil
NOTE: Hydraulic oils require anti-wear qualities at least API Ser-
vice Classification GL-3, and sufficient chemical stability
for mobile hydraulic system service.
NOTE: Machines may be equipped with Mobil EAL224H biode-
gradable and non-toxic hydraulic oil. This is vegetable oil
based and possesses the same antiwear and rust protec-
tion characteristics as mineral oils, but will not adversely
affect the ground water or the environment when spilled
or leaked in small amounts. Mobil EAL224H has a viscos-
ity of 34 cSt at 40° C. and viscosity index of 213. The oper-
ating temperature range of this oil is -18° C. to +83° C.
NOTE: Aside from JLG recommendations, it is not advisable to
mix oils of different brands or types, as they may not con-
tain the same required additives or be of comparable vis-
cosities. If use of hydraulic oil other than Mobil DTE 11M
is desired, contact JLG Industries for proper recommen-
dations.
Table 6-7. Hydraulic Oil
Hydraulic System
Operating
Temperature Range
S.A.E. Viscosity
Grade
+0° to + 180° F
(-18° to +83° C)
10W
+0° to + 210° F
(-18° to +99° C)
10W-20, 10W30
+50° to + 210° F
(+10° to +99° C
20W-20
Table 6-8. Mobil DTE 11M Specs
ISO Viscosity Grade #15
Gravity API 31.9
Pour Point, Max -40°F (-40°C)
Flash Point, Min. 330°F (166°C)
Viscosity
at 40° C 15 cSt
at 100° C 4.1 cSt
at 100° F 80 SUS
at 210° F 43 SUS
cp at -30° F 3.200
Viscosity Index 140