JLG E300 Operator Manual - Manual (Page 36)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-6 – JLG Lift – 3121252
9. Jib Lift
Provides raising and lowering of the jib.
10. Jib Swing
Allows swinging of the jib.
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR
SLIGHT LEVELING OF THE PLATFORM. INCORRECT USE COULD CAUSE
THE LOAD/OCCUPANTS TO SHIFT OR FALL. FAILURE TO DO SO COULD
RESULT IN DEATH OR SERIOUS INJURY.
11. Platform Leveling Override
A three position switch allows the operator to adjust the
automatic self leveling system. This switch is used to
adjust platform level in situations such as ascending/
descending a grade.
12. Platform Rotate
Provides rotation of the platform.
13. Platform Overload (If equipped)
Indicates the platform has been overloaded.
14. Battery Indicator and Hourmeter
The battery indicator displays the present charge of the
batteries. The hourmeter counts the amount of machine
operating time, up to 9,999.9 hours, and cannot be
reset.