JLG X20J Plus Operator Manual - Manual (Page 59)

mum displacement, therefore medium travel speed
• FAST: variable rpm according to the selected movement. Travel motors in automatic displacement
variation mode, therefore maximum travel speed.
The three speeds are selected by pressing button 5 in sequence, with a cyclical routine. The
selected speed is displayed on the screen in position 4.
BUTTON 6:
Enters the auto service menu (see paragraph 9 Remote control service menu).
BUTTON 7:
Used to automatically lower the stabilisers.
BUTTON 10:
PETROL ENGINE
Allows the preheating of the petrol engine. One pressure on the button sets the engine at
2200 rpm for 20 seconds, in order to heat the engine and improve the initial phases of use.
DIESEL ENGINE
Enables the activation of the sparking plugs preheating. One pressure on the button causes a
preheating equal to 10 seconds. In case of anticipated starting, the preheating ends when
starting.
X20JPR0020413
BOOM LIFT MODELS X20JPLUS
JLG
55