Hydraulic oil, Hydraulic oil -6, Mobil dte 11m specs -6 – JLG M400 Operator Manual User Manual
Page 98
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6-6
– JLG Lift –
3121215
Hydraulic Oil
NOTE: Hydraulic oils must have anti-wear qualities at least to API
Service Classification GL-3, and sufficient chemical stabil-
ity for mobile hydraulic system service.
Aside from JLG recommendations, it is not advisable to
mix oils of different brands or types, as they may not con-
tain the same required additives or be of comparable vis-
cosities. If use of hydraulic oil other than Mobil DTE 11M
is desired, contact JLG Industries for proper recommen-
dations.
Table 6-7. Hydraulic Oil
Hydraulic System Operating
Temperature Range
S.A.E. Viscosity
Grade
+0
o
to + 180
o
F(-18
o
to +83
o
C
10W
+0
o
to + 210
o
F(-18
o
to +99
o
C
10W-20, 10W30
+50
o
to + 210
o
F(+10
o
to +99
o
C
20W-20
Table 6-8. Mobil DTE 11M Specs
ISO Viscosity Grade
#15
Gravity API
31.9
Pour Point, Max
-40°F (-40°C)
Flash Point, Min.
330°F (166°C)
Viscosity
at 40° C
15 cSt
at 100° C
4.1 cSt
at 100° F
80 SUS
at 210° F
43 SUS
cp at -30° F
3.200
Viscosity Index
140