JLG M400 Operator Manual - Manual (Page 100)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6-8 – JLG Lift – 3121215
Serial Number Locations
For machine identification, a serial number plate is affixed to
the left rear of frame, in front of left rear wheel. If the serial
number plate is damaged or missing, the machine serial
number is stamped on the top left side of the frame and the
top left side of the turntable. In addition, the serial number is
stamped on top of the end of the upper boom, mid boom,
and lower boom at the left rear of the booms.
Figure 6-1. Serial Number Locations
SERIAL NUMBER
UPPER BOOM
SERIAL NUMBER
MID BOOM
SERIAL NUMBER PLATE
SERIAL NUMBER FRAME
SERIAL NUMBER
TURNTABLE
SERIAL NUMBER
LOWER BOOM