JLG 15/20MSP Operator Manual - Manual (Page 99)

SECTION 5 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
3121230 – JLG Lift – 5-19
Selecting Programmable Item to Adjust Adjusting Programmable Setting
TO EXIT Programming Mode after adjusting programmable set-
tings, power machine down with either the Main Power Selector
Switch or Emergency Stop Button.
1. Use the Platform UP/DOWN buttons (1) to scroll
through the list of programmable items available to
your programming level.
2. Once a programmable item to be adjusted is selected,
press the Brake Release button (2) to enter that set-
tings’ adjustment mode.
1 2
1. Adjust the programmable setting using the Platform
UP/DOWN buttons (1), see Table 5-6 for range of set-
tings for that item.
2. Once parameter is set for the programmable item,
press the Brake Release button (2), this will enter the
parameter and return you to the Programmable Set-
tings Menu.
1 2