JLG 15/20MSP Operator Manual - Manual (Page 37)

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3121230 – JLG Lift – 3-11
In the LCD Display Symbols illustration item (2), the Function Dis-
play or Function Disabled Indicators will vary as shown following: LCD Display Fault Conditions
Table 3-2, LCD Display - Operation Fault Conditions show com-
mon LCD display Fault indications which may occur during opera-
tion and are usually caused by either an error in machine
operation or a work area condition. These fault conditions can
usually be corrected by the operator and do not require a qualified
mechanic to repair.
AFTER A FAULT CONDITION IS CORRECTED THE MACHINE POWER MAY
NEED TO BE RECYCLED TO RESET THE GROUND CONTROL STATION.
DRIVE Disabled
LIFT UP Disabled
LIFT DOWN Disabled
Both LIFT UP and LIFT DOWN
Disabled
Drive Speed Cut-Back -
Turtle) Mode Engaged
(When Platform is Elevated)
Battery Charger (AC) Plugged In