JLG 2505H Operator Manual - Manual (Page 44)

Section 3 - Controls and Indicators
3-4 31200743
Park Brake
Park Brake Switch (G5-18A)
Park brake switch (1) controls the application and release of the park brake.
Indicator light on instrument panel illuminates to indicate brake is applied.
• Depress top of switch to engage park brake. With park brake applied,
transmission will not engage forward or reverse.
• Depress bottom of switch to disengage park brake.
WARNING
MACHINE ROLL-AWAY HAZARD. Always move park brake switch to "ON"
position, lower boom to ground and stop engine before leaving cab.
WARNING
CRUSH HAZARD. Turning engine off applies the park brake. Applying park
brake or turning engine off while traveling will cause unit to stop abruptly and
could cause load loss. To stop the machine in an emergency, either apply the
park brake or turn off engine.
OAL1382
1