JLG 40xxPS Operator Manual - Manual (Page 105)

Section 5 - Attachments and Hitches
5-25 31200205
To Fork Position:
• Press and hold button (3) to shift forks out or press and hold button (4) to shift
forks in.
OR
• While pressing and holding button (5), move joystick forward to shift forks out or
move joystick back to shift forks in.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-11.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could
damage forks or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
WARNING
CRUSH HAZARD. Do not use fork positioning to push or pull objects or load.
Failure to comply could cause object or load to fall.