JLG LSS Scissors - Manual (Page 67)

3124288
– JLG Lift –
7-7
.
FIGURE 7-2. LOAD SENSING SYSTEM INSTALLATION (500RTS)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
LOAD SENSING SYSTEM INSTALLATION (CE SPEC) Ref.
0272973 500RTS with Standard Deck Ref. E
0272975 500RTS with Mega Deck Ref. E
1 to 2 Not Used
3 Bolt Options: 3
0641406 Bolt 1/4”-20NC x 3/4” (Prior to S/N 0200120099)
0641416 Bolt 1/4”-20NC x 2” (S/N 0200120099 to Present)
4 to 5 Not Used
6 0641668 Bolt 3/8”-16NC x 8 1/2” 4
7 to 9 Not Used
10 Module, Load Sensing Options: 1
1600350 Prior to S/N 0200120099
1600387 S/N 0200120099 to Present
11 Not Used
12 3311405 Locknut 1/4”-20NC 3
13 3311605 Locknut 3/8”-16NC 4
14 Not Used
15 3422939 Pin, Load Management (Includes Harness) 4 D
15A Not Available Connector, Strain Relief 1
15B Not Available Plug, Male 6 Position 1
Not Available Socket, Female 6
16 to 19 Not Used
20 4240033 Tie-Strap 4
21 to 24 Not Used
25 4751600 Flatwasher 3/8” Wide 8
26 4922904 Module to Analyzer Harness 1 B
26A 4460836 Plug, Male 12 Position 1
4460465 Socket, Female 4
4460466 Seal, Plug 8
0840055 Boot 1
26B 4460761 Connector, Female 4 Position 1
4460294 Pin, Male 4
27 4922911 Main Load Sensing Harness 1 B
27A 4460933 Plug, Male 12 Position 1
4460465 Socket, Female 4
4460466 Seal, Plug 8
0840055 Boot 1
28 1061021 Cable, Extension 2 B
28A Not Available Plug, Male 6 Position 1
Not Available Socket, Female 6
28B Not Available Connector, Female 6 Position 1
Not Available Pin, Male 6