JLG X19J Operator Manual User Manual

Page 27

2.3 SAFETY WARNINGS

2.3.1 GENERALITIES

To avoid accidents, before starting work and before performing any maintenance opera‑
tions, it is necessary to read, understand and follow all the precautions and warnings con‑
tained in this manual. The user/operator of the machine must decline all responsibility for
operation until having read this manual and fully understood how to use the machine
under the supervision of an expert and qualified operator.

Carefully read all the safety messages provided in this manual and the safety signs on the
machine.
Keep the safety signs in good condition and replace them if they are damaged.
Make sure that any new components on the machine are provided with the correct safety signs.

2.3.2 NOISE AND VIBRATIONS

The JLG platforms with electric motor have been tested according
to the parameters of European directive 2000/14 EC, with the gua‑
ranteed sound power level measurement shown on the machine’s
EC declaration of conformity.
When operating the aerial part of the machine, this value is redu‑
ced even further as the basket moves away from the main source
of noise.
The vibrations transmitted to the operator from the controls and
directly from the floor of the basket are lower than the maximum
allowed limits.

BOOM LIFT MODELS X19J

JLG

X19JR0620113