JLG 1500SJ Operator Manual - Manual (Page 121)

SECTION 5 - LCD DISPLAY PANEL - GENERATION 1 & 2
3121261 – JLG Lift – 5-25
Operational Fault - Transport Swing Fault Screen
The Transport Swing Fault Screen appears when the 0038 -
SWING ENVELOPE ENCROACHED - HYDRAULICS SUSPENDED
operational fault is active, indicating that swing is restricted to +/
- 40 degrees from center while the axles are retracted. This screen
will remain until the operator operates one of the controls high-
lighted on the screen to correct the condition (the axles are
extended or the turntable swings away from the limit). In the
lower right hand corner, a check mark in a green circle indicates
no serviceable faults are present. If a system fault is present, the
numeric fault code with a safety alert symbol is displayed. Multi-
ple faults will display in succession. Check the Service Manual for
the specific fault code.