JLG 1500SJ Operator Manual - Manual (Page 115)

SECTION 5 - LCD DISPLAY PANEL - GENERATION 1 & 2
3121261 – JLG Lift – 5-19
Operational Fault - With Graphics Screen
The Operational Fault Screen appears if the JLG Control System
has sensed a fault that provides operational information. The dis-
play shows an icon that represents the fault and available control
options along with the fault code, which is displayed above the
fault icon (Fault 2224 - Footswitch Selected Before Start is used as
an example). In the lower right hand corner, a check mark in a
green circle indicates no serviceable faults are present. If a ser-
viceable fault is present, the numeric fault code with a safety alert
symbol is displayed. Multiple faults will display in succession.
Check the Service Manual for the specific fault code. In addition,
the locked/unlocked status of the jib is displayed. The locked jib
icon is only displayed for 2 seconds after the pin is in the locked
position.