JLG 120HX Service Manual - Manual (Page 16)

SECTION 1 - SPECIFICATIONS
1-6 – JLG Lift – 3120819
IT IS RECOMMENDED THAT MOBIL EAL224H HYDRAULIC OIL BE
STORED ABOVE FREEZING (0 C) AS THE OIL MAY APPEAR
CLOUDY AFTER EXPOSURE TO LOW TEMPERATURES FOR
EXTENDED PERIODS OF TIME. THE CLOUDINESS WILL DISAPPEAR
WHEN THE OIL IS WARMED TO AT LEAST 10 C AND AGITATED. DO
NOT ATTEMPT TO "THIN" THE OIL WITH NO.2 DIESEL FUEL. FOR
BEST RESULTS, STORE THE OIL ABOVE FREEZING.
NOTE: Accidentally mixing Mobil EAL224H hydraulic oil with
other mineral oils will cause no loss of performance
characteristics. However, biodegradability may be
reduced and toxicity may be increased, depending
on the oil and level of contamination.
Lubrication Specifications
NOTE: Refer to Figure 1-2 for specific lubrication proce-
dures.
Table 1-5. Lubrication Specifications
KEY SPECIFICATIONS
MPG Multipurpose Grease having a minimum dripping
point of 350° F. Excellent water resistance and
adhesive qualities, and being of extreme pres-
sure type. (Timken OK 40 pounds minimum.)
EPGL Extreme Pressure Gear Lube (oil) meeting API
service classification GL-5 or MIL-Spec MIL-L-
2105.
HO Hydraulic Oil. API service classification GL-3, e.g.
Kendall Hyken 052 or Mobilfluid 424.
EO Engine (crankcase) Oil. Gas - API SG/SH class,
MIL-L-2104. Diesel - API CC/CD/CE class, MIL-L-
2104B/MIL-L-2104C.