Eppendorf Galaxy CO2 Sensor - Manual (Page 9)

Galaxy O2 Sensor Setup — Instructions
9
3. Turn clockwise to secure.
4. Connect the sensor by plugging in the connector.
Hint!
Push O
2
sensor into access port; ensuring the connector and wire have been taken out
and held to the side
Hint!
Finger tighten the O
2
sensor only, do not use metal tools or excessive force.
Hint!
Hold the white plug and NOT the wires; connect the Incubator to the O
2
sensor and
ensure that the connector is fully inserted and oriented correctly
1
Galaxy O
2
sens
or
se
tup