Eppendorf Galaxy CO2 Sensor - Manual (Page 8)

Galaxy O2 Sensor Setup — Instructions
8
1.4 Installing O
2
sensor on Galaxy 14 liter incubator
1. Remove the O
2
sensor access plug at the rear of the incubator.
2. Insert the O
2
sensor into the access port using the O
2
sensor tool.
Hint!
•
Before replacing the O
2
sensor disable the O
2
control as follows:
a Press the programming ( * ) key.
b Select ‘02C.0nt’ using the » and º keys and press the ENTER key.
c Toggle to the OFF position and press the ENTER key.
Hint!
Twist and Pull access cover plug to remove.
1
Galaxy O
2
sen
sor
se
tu
p