Eppendorf 2150 Digital Platform Shaker User Manual
Page 20

Installation
New Brunswick Digital Platform Shaker Innova® 2100/2150
English (EN)
20
All clamps are shipped complete with hardware. Clamps for 2 – 6
L flasks are shipped with an additional
girdle to keep the flasks in place. To install 2 – 6
L
clamps:
Abb. 4-1: Double girdle clamp
Fig. 4-1:
Double girdle clamp
1. Place each clamp on the platform, secure the
clamp in place with the correct type and number
of screws.
2. Place the loose girdle around the upper portion of
clamp body so that it is held in place by the legs
of the clamp.
3. Insert the flask into the clamp.
The instructions and illustration above also apply to 2800
ml Fernbach flask clamps.
1 Clamp mounting holes
With screws
3 Lower girdle with girdle tubes
Prevents flask from spining
2 Upper girdle with girdle tubes
Secures flask within the clamp
4 Clamp body (legs and base)
1
2
4
3