4 installation, 1 unpacking, 2 checking voltage configuration – Eppendorf 2150 Digital Platform Shaker User Manual
Page 17: 3 space requirements, Installation 4.1, Unpacking, Checking voltage configuration, Space requirements

Installation
New Brunswick Digital Platform Shaker Innova® 2100/2150
English (EN)
17
4
Installation
4.1
Unpacking
Upon unpacking the unit, inspect it carefully for any apparent damage that may have occurred during
transit. Immediately report any damage to the carrier and to the Eppendorf Service Department. Do not
discard the crate or packing material.
4.2
Checking voltage configuration
Do not plug your shaker into the power source until you determine that voltage of your unit (by checking
the voltage indicator and label on the rear of the unit) matches your electrical service.
4.3
Space requirements
It is essential that the unit be situated in an area where there is sufficient space for the shaker and platform
to clear walls and other potential obstructions during operation.
The dimensions, including a platform but excluding glassware, are:
VERY IMPORTANT: There are 2 small plastic straps that hold the bearing housing in place for
shipping. Be sure to remove these 2 straps before operation.
WARNING! Risk of electric shock and/or damage to device!
Do not plug the shaker into a power source until you check the voltage and frequency
settings.
Model
Width
Depth
Height
Innova 2100 without capacity upgrade
48 cm (19 in)
55.5 cm (21 7/8 in)
17 cm (6 3/8 in)
Innova 2150 and 2100 with capacity
upgrade
48 cm (24 in)
55.5 cm (21 7/8 in)
17 cm (6 3/8 in)