Eppendorf ThermoMixer FP - Manual (Page 20)

20
Operation
Eppendorf ThermoMixer
® F0.5/F1.5/F2.0/FP
English (EN)
5.4 Mixing
5.4.1 Mixing without temperature control
1. In order to switch off the temperature control, press the temp off key.
2. Set the mixing frequency with the speed arrow keys.
3. In order to start the mixing process, press the start/stop key.
• The symbol flashes on the display.
4. In order to end the mixing process, press the start/stop key.
• The display shows the last used parameters.
5.4.2 Mixing and tempering
1. Set the temperature with the temp arrow keys.
The device immediately starts to perform the temperature control.
2. Set the mixing frequency with the speed arrow keys.
3. In order to start the mixing process, press the start/stop key.
• The symbol flashes on the display.
• The display shows the actual temperature/set temperature and the mixing
frequency.
4. In order to end the mixing process, press the start/stop key.
• The display shows the last used parameters.
• Temperature control is continued.
The mixing frequency can be adjusted in steps of 50 rpm.
• Eppendorf ThermoMixer F0.5: 300 rpm – 2 000 rpm
• Eppendorf ThermoMixer F1.5: 300 rpm – 1 500 rpm
• Eppendorf ThermoMixer F2.0: 300 rpm – 1 500 rpm
• Eppendorf ThermoMixer FP: 300 rpm – 2 000 rpm