Eppendorf ThermoMixer FP - Manual (Page 17)

Operation
Eppendorf ThermoMixer ® F0.5/F1.5/F2.0/FP
English (EN)
17
Abb. 5-2:Display Eppendorf ThermoMixer F0.5/F1.5/F2.0/FP
Fig. 5-2: Display Eppendorf ThermoMixer F0.5/F1.5/F2.0/FP
1 Device status
Device is performing mixing/
temperature control.
2 ThermoTop
ThermoTop has been attached.
To prevent condensation, the device
heats up the ThermoTop, before
controlling the temperature of the
thermoblock.
3 Speaker
Speaker switched on.
Speaker switched off.
4 Key lock
Key lock activated: Parameters cannot
be changed.
No key lock.
5 Mixing frequency
6 Actual temperature
When the actual temperature flashes on
the display, the device is not in
temperature control mode operation.
7 Set temperature
When the set temperature has been
reached, only one value is displayed.
1 2 3 4
5 6 7