B&K PT 3 series II - Manual (Page 30)

PREAMPLIFIER TUNER SPECIFICATIONS
300 Ohms Antenna Input Impedance: 75 Ohms Antenna Input Impedance:
70 dB, A Weighted Signal to Noise Ratio:
30 dB Alternate Channel
Selectivity: 65 dB Alternate Channel Selectivity:
15 / 35 dBf Mono/Stereo Sensitivity:
28 dBf IHF (Usable) Sensitivity: 12 dBf IHF (Usable) Sensitivity:
2 dB Capture Ratio:
20 Hz - 15 kHz, +1/ -3 dB Frequency Response
Less than 0.3% Total Harmonic Distortion: Less than 0.25% Total Harmonic Distortion:
520 - 1670 kHz Frequency Range: 87.5 - 107.9 MHz Frequency Range:
AM section Tuner Specifications FM Section Tuner Specifications
RS232 software Upgrade: 80 Hz 12 dB per octave Low Pass Crossover
80 Hz 12 dB per octave High Pass Crossover
4 Audio Analog Outputs
5 years preamplifier
1 year remote Warranty:
See Warranty page for
complete explanation 6 Audio Analog Inputs
221 Ohms Output Impedance:
10 pounds Weight: 50 k Ohms Input Impedance:
17"(w)x10"(d)x3.50"(h) Dimensions: 89 dB CCIR 2 k Weighted
max level Signal to Noise Ratio:
Line 0.5 Amp/250 Volt Replacement fuses: 8 V rms Maximum Output Level:
30 watts max Power consumption: 63 mV Input Sensitivity:
120/220/240 VAC Line voltage:
5 Hz - 20 kHz , +0
/
0.5dB
Frequency Response:
Miscellaneous Preamplifier Specifications
Specifications subject to change without notice
27
P/N 13010 REV 0005