beautypg.com

Caution, Warning, Electrical connection – Bosch WFMC1001UC User Manual

Page 7

background image

7

Level the washing machine front to

back and side to side with the four

heightĆadjustable feet and a bubble

level:

d

CAUTION

d

TO AVOID RISK OF INJURIES-Take

care when using the wrench.

q Loosen the counter nut 1 using

the wrench for levelling.

q Adjust the height by turning the

heightĆadjustable foot 2.

q Tighten lock nut 1 against the

housing.

q Level machine as low as possible.

q Fine tune the leveling by placing a

small load in the machine, starting

the machine in spin cycle and then

leveling again.

Electrical connection

GROUNDING INSTRUCTIONS

This appliance must be grounded. In

the event of a malfunction or

breakdown, grounding will reduce the

risk of electrical shock by providing a

path of least resistance for the electric

current. This appliance features a cord

with an equipmentĆgrounding

conductor and a grounding plug. The

plug must be plugged into an

appropriate outlet which has been

properly installed and grounded in

accordance with all local regulations

and ordinances.

d

WARNING

d

Improper connection of the

equipment grounding conductor

may result in electric shock. Have

the appliance checked by

a qualified electrician or service

technician if you are in doubt as to

whether the washer has been

properly grounded.

Do not modify the plug provided with

the appliance - if it will not fit in the

outlet, have a proper outlet installed by

a qualified electrician.

d

WARNING

d

The washing machine must only be

connected to an individual branch

circuit via a socket which has been

properly installed and grounded.

The household electrical voltage must

correspond to the voltage specification

on the washing machine (rating plate,

see page 22).

Connection specifications as well as

the required fuses are stipulated on the

appliance rating plate.

Volts

Hertz

Amperes

Watts

110-120

60

15

1350

(max.)

Make sure that:

-

the power plug fits into the socket.

-

the wire size is sufficient.

-

the grounding system is properly

installed.

The power cord may be replaced by an

electrician only.

Replacement power cords are

available from Customer Service.

d

WARNING

d

To reduce the risk of fire or electrical

shock, DO NOT use an extension

cord or an adapter to connect the

washing machine to the power

supply.

If an ground fault circuit breaker is to be

used, only use types marked with the

following symbol: 7.

Only this symbol can guarantee

compliance with all current regulations.

Do not insert/remove the power plug

with wet or damp hands.

Touch the plug only when removing the

plug from the socket.