Bosch WFMC1001UC - Manual (Page 11)

11
Panel
Buttons for additional options
(in addition to the program if required)
Bleach: A bleach cycle will be added to the selected
program.
Rinse Plus: Additional rinsing cycle.
Additional options can be combined at any time.
Additional option selected:
Indicator light is lit red.
Switch off additional option:
Press button again. Indicator light turns off.
Start/Pause button
Starts or interrupts the washing cycle (program
must first be selected).
Indicator light
Indicator light flashes red: Settings can be
changed, the wash cycle can be started, door
is locked for reasons of safety or program is in
Pause" mode.
Indicator light is lit red: Program is running and
"Pause" can be activated.
The indicator light is off: Program is finished or
no program selected.
Delay Start button
The Start time can be delayed by up to a maximum of 12
hours (if required).
Program selector
Switches the machine on and off and selects the program.
Can be turned in both directions.
The program selector does not turn while the program is
running - the program sequence is electronically
controlled.
Indicator lights
The door locked LED lights up if a program is selected and
the Start button is pressed.
The wash, rinse and spin LED lights up while the
respective program segment runs.
The finished LED lights up if the program has ended.
Indicator LED lights flash: Operation error!